Buchi KjelSampler K-377 Bedienungsanleitung PDF herunterladen (Seite 112)

6 Operation

112

K-375/376/377 Operation Manual, Version B

If a chiller is connected to the device the cooling

water control will be omitted.

If no chiller is connected the cooling water control

can be set either to manual, with a speciﬁc ﬂow

rate, or to automatic. In automatic mode the

temperature of the cooling water is measured and

the volume ﬂow is adjusted depending on the water

temperature.

If a printer is connected to the device (HP PCL

-compatible) select the printer port (network or

USB-printer), the paper format and the color mode

(monochrome, CMY or CMYK).

For a network printer in addition the IP address has

to be speciﬁed.

NOTE

If no printer is available, you may select Adobe

PDF as printer type – the data is then stored as a

pdf-ﬁle on a USB stick.

Network

If connected to a network, you can assign a device

name for the device to be recognized within the

network.

The IP address can either be obtained automati-

cally via DHCP (Select YES), or entered manually

together with the subnet mask.

NOTE

More details regarding the network connection

can be found in the document “Manual – Network

connection K-375”, which can be obtained from

any authorized BUCHI representative.

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 159 160

Keine Kommentare

Buchi KjelSampler K-377 Bedienungsanleitung Seite 112