Buchi KjelSampler K-377 Bedienungsanleitung PDF herunterladen (Seite 46)

5 Putting into operation

K-375/376/377 Operation Manual, Version B

5.3 Transfer connection K-376 (K-377) – K-375

The transfer connection between the K-375 and the K-376 or K-377 sampler consists of two hoses,

the white transfer hose and the red steam hose.

Both hoses have to be connected to the K-375 as well as to the sampler (K-376 or K-377) and

secured with hose clamps. The K-376 is delivered with both hoses premounted to the device.

WARNING

Serious chemical burns by corrosives. Risk of burns by hot steam.

• Never operate the K-375 together with a sampler while the sample transfer and steam hoses

are missing, defective, or incorrectly mounted.

• Make sure there is always enough room for a free movement of the sampler arm – if the

sampler arm collides with any object during movement, the transfer hose and/or the steam

hose may break!

5.3.1 Connecting the K-376 to the K-375









1. Fix the transfer hose support a with the

screw on the valve b on the rear side of

the K-375.

2. Guide both hoses c and d through the

transfer hose support.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 159 160

Keine Kommentare

Buchi KjelSampler K-377 Bedienungsanleitung Seite 46